Sale! 80 1911 frame
80% 1911 FRAME CHECKERED

80% 1911 Frame Checkered On SALE for a Limited Time at this price

80% 1911 series 70 forged 4140 steel frame with checkered grip.

This is a not an FFL item. This is not a complete 1911 frame and still requires some additional machining to be done.

4 1911 frame operations left to be completed are

  • Decking the top (REQUIRED TO DO FIRST)
  • hammer hole
  • Sear hole
  • Slide rails
  • Beavertail safety fitting (personal preference)
  • 80% 1911 70 Series Steel Frame with checkered grip
  • 1911 Frames precision machined 
  • Government style frames
  • 4140 Steel
  • In the White 
  • Standard Trigger Guard
  • 30 LPI Checkered Front Strap
  • NON Ramp 
  • Magwell is Broached 
  • Trigger Broached
  • MADE IN USA

The 1911 frames machined single stack receiver is ready for the slide, barrel, and fire-control components of your choice. In addition, each 80 1911 frame is machined to precise tolerances from high-quality 4140 carbon steel, then heat-treated to Rc 28-32 for exceptional wear resistance. Furthermore, they are bead blasted to produce a smooth, non-reflective surface ready for the finish of your choice. Rails are not cut . Grip safety is full size 1911 with 70 Series tang  and has a smooth, plain, front strap with a rounded. Front of the 1911 frame grip comes with 30 lpi checkering. In conclusion, this is the perfect choice if you're looking to build a rugged, precision-shooting competition, combat, or carry pistol.

Rated 5.00 out of 5
$245.95 $200.95Add to cart
Sale! 80 1911 frame
80% 1911 FRAME CHECKERED SS

80% 1911 FRAME CHECKERED SS

80%1911 series 70 forged SS steel frame with checkered grip.

This is a not an FFL item. This is not a complete frame and still requires machining to be done.

4 Operations left to be completed are

  • Decking the top
  • hammer hole
  • Sear hole
  • Slide rails
  • Beavertail safety fitting (personal preference)
  • 80% 1911 70 Series SS Frame with checkered grip
  • 1911 Frames precision machined 
  • Government style frames
  • SS Steel
  • In the White 
  • Standard Trigger Guard
  • 30 LPI Checkered Front Strap
  • NON Ramp 
  • Magwell is Broached 
  • Trigger Broached

Machined single stack receiver is ready for the slide, barrel, and fire-control components of your choice to build a rugged, precision-shooting competition, combat, or carry pistol. Machined to precise tolerances from high-quality 416 SS , then heat-treated to Rc 28-32 for exceptional wear resistance. Bead blasted to produce a smooth, non-reflective surface ready for the finish of your choice. Rails are not cut . Grip safety is full size 1911 with 70 Series tang . Frame is machined from a high-grade Forgings  and has a smooth, plain, front strap with a rounded. Front frame grip comes with 30 lpi checkering.

Rated 5.00 out of 5
$275.95 $215.95Add to cart
Sale! 80% 1911 FRAME SMOOTH
80% 1911 FRAME SMOOTH

80% 1911 SMOOTH FRAME on sale limited time at this price

80%1911 series 70 forged 4140 steel frame with checkered grip.

This is a not an FFL item. This is not a complete frame and still requires machining to be done.

4 Operations left to be completed are

  • Decking the top
  • hammer hole
  • Sear hole
  • Slide rails
  • Beavertail safety fitting (personal preference)
  • 80% 1911 70 Series Steel Frame with checkered grip
  • 1911 Frames precision machined 
  • Government style frames
  • 4140 Steel
  • In the White 
  • Standard Trigger Guard
  • 30 LPI Checkered Front Strap
  • NON Ramp 
  • Magwell is Broached 
  • Trigger Broached

Machined single stack receiver is ready for the slide, barrel, and fire-control components of your choice to build a rugged, precision-shooting competition, combat, or carry pistol. Machined to precise tolerances from high-quality 4140 carbon steel, then heat-treated to Rc 28-32 for exceptional wear resistance. Bead blasted to produce a smooth, non-reflective surface ready for the finish of your choice. Rails are not cut . Grip safety is full size 1911 with 70 Series tang  and has a smooth, plain, front strap with a rounded.

Rated 5.00 out of 5
$220.95 $200.95Add to cart
Sale! 80% 1911 STAINLESS STEEL FRAME SMOOTH
80% 1911 STAINLESS STEEL FRAME SMOOTH

Available in ramped and non ramped just add in the notes

80% 1911 SMOOTH FRAME

80%1911 series 70 forged 416r stainless steel frame with smooth grip.

This is a not an FFL item. This is not a complete frame and still requires machining to be done.

4 Operations left to be completed are

  • Decking the top
  • hammer hole
  • Sear hole
  • Slide rails
  • Beavertail safety fitting (personal preference)
  • 80% 1911 70 Series Steel Frame with checkered grip
  • 1911 Frames precision machined 
  • Government style frames
  • 416r Stainless Steel
  • In the White 
  • Standard Trigger Guard
  • NON Ramp 
  • Magwell is Broached 
  • Trigger Broached
  • MADE IN USA

Machined single stack receiver is ready for the slide, barrel, and fire-control components of your choice to build a rugged, precision-shooting competition, combat, or carry pistol. Machined to precise tolerances from high-quality 416R stainless steel, then heat-treated to Rc 28-32 for exceptional wear resistance. Bead blasted to produce a smooth, non-reflective surface ready for the finish of your choice. Rails are not cut . Grip safety is full size 1911 with 70 Series tang  and has a smooth, plain, front strap with a rounded.

not rated $225.95 $200.95Add to cart
Sale! 80% 9mm AR15 lower Slim Black Anodized
80% 9mm AR15 lower Colt Slim Black Anodized
80% 9mm AR15 lower Colt Slim Black Anodized
  • Gen 2
  • Uses Colt magazines
  • Features last round bolt hold open
  • Made from 7075-T6 forging and machined to mil-spec
  • This receiver takes Colt Magazines
  • MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized
  • Slim magwell
  • MADE IN USA
https://thebuffalo.us/shop/9mm-builders-kit/
  • We choose the 7075-T6 because it is one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent and it is ideally used for highly stressed parts.

Rated 5.00 out of 5
$165.95 $120.95Add to cart
Sale! AR15 80% 9mm Dedicated Billet Lower Glock Mag W/ Kit RAW
AR15 80% 9mm Dedicated Billet Lower Glock Mag W/ Kit RAW
Product Description: Billet 9mm Glock 80% AR15 Lower. Proudly Made in the U.S.A. and Exclusive by Gun Point Engineered for Glock 9x19mm, .40 S&W and . 357 SIG Glock magazines Features LAST ROUND BOLT HOLD OPEN ( 9mm Finishing Kit Included
  • CNC Machined from Solid 7075-T6 Billet aluminum
  • Integrated Oversized Trigger Guard gives you ample clearance when using gloves.
  • Ambidextrous Finger Location Identifier / Finger Rest.
  • Type III Class 2 Hardcoat Anodized Finish
  • Bolt Catch screw in pins in place of roll pins
  • Bolt Catch 6-32 pivot screw included
  • Threaded saftey detent hole for 6-32 set screw
  • 6-32 x .125 Saftey Detent set screw included
  • Upper tensioning set screw 1/4 – 28x .375
  • Receiver extension and grip screw hole drilled and threaded
  • Last round bolt hold open on an empty magazine
  •  (Use ANY Mil-Spec Upper)MADE IN THE U.S.A.
  • These are 80% Gun Point Custom Glock 9mm billet lower receivers.
The Buffalo has an exclusive on this lower. You can NOT find these anywhere else in 80% form. These are a dedicated 9mm Billet design that comes with all the features in the top of the line Gun Point model but in an 80% configuration. These lowers have all the key features you would expect from a high end manufacturer
not rated $215.95 $195.95Add to cart
Sale! AR15 Billet upper and 80% lower matching set
AR15 Billet upper and 80% lower matching set

80% BILLET AR15 lower receivers and Upper receiver Combo.

Our mission is to provide customers with a High quality product that they are excited to own & use in any environment that they find themselves in. The high standards that they have placed on their products are driven directly by the high expectations that customers have for any of our products. By utilizing the latest machining technologies during the production of their AR receivers they are able to exceed military standards ensuring the best possible base to build an AR rifle from. Our AR15 Billet Lower Receiver is a Precision machined AR 15 style receiver. The receiver is the perfect foundation to start any AR rifle build. Quality CNC Billet 7071 T6 AR-15 stripped Upper Receiver. They will all be machined to except the bad levers. The Receivers will flat top M4 upper receiver. These are made from billet and hard coat anodize black. We machine these receivers out of billet Aluminum and finish it in a durable Hard Anodized finish. We cut the M4 feed ramps before the Anodizing process. We also flared the side walls of the receiver to eliminate accidental bolt release problems and we also machined the upper receiver in a way that lets you use the popular Magpul BAD lever or other aftermarket bolt catch levers which most other billet upper receivers don’t let you do. Because of our beefier design, it allows for less flex than forged upper receivers.

we machined our billet upper receiver to accept most aftermarket rail systems as well as pre-install the forward assist and the ejection port door.Our billet upper receiver matches our billet lower perfectly, but it also works great with standard forged lowers so it’s fully up to you on which receiver you want to use. Features:
  • CNC MACHINED FROM 7071 T6 BILLET
  • ANODIZED BLACK
  • INTEGRALLY MACHINED TRIGGER GUARD
  • REINFORCED BUFFER TUBE AREA
  • FLARED MAGWELL, COMPATIBLE WITH USGI AND MAGPUL GEN 2⁄3 MAGAZINES

NON FFL ITEM

not rated $365.95 $295.95Add to cart
Sale! Billet 80 AR LOWER
Billet 80% AR LOWER
  •  This is not a completed receiver and still requires machining to be done in order to have an operational firearm.
  •  NO FFL is required for purchase, item can be shipped directly to your home.
  • As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968.
  • Customer is responsible for compliance with local state and federal regulations regarding any products sold on our website.
  •  Our lowers have been found to be compatible with most jigs made for finishing forged style lowers
not rated $135.95 $85.95Add to cart
Sale! Billet 80% MA.308 LOWER (ANODIZED)
Billet 80% MA.308 LOWER (ANODIZED)
Billet 80% MA.308 LOWER (ANODIZED) DESCRIPTION
The TB .308 80% lower receiver is precision 3-D machined from billet  7075 aluminum—made in USA—to mil spec tolerances, finish options are: tumble de-burred, bead blast finished and Mil 8625 Type III, Class 2 anodized. All that is left to do is machine the fire control pocket, for the trigger group and drill a few holes. Once complete you will have a fully functional TB.308 DPMS pattern lower receiver for .308 / 7.62x51 NATO, compatible with DPMS platform upper receivers, Magpul, SR-25 & DPMS LR-308 Magazines. Includes integrated trigger guard. - This is not a completed receiver and still requires machining to be done in order to have an operational firearm. - NO FFL is required for purchase, item can be shipped directly to your home. - As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968.
not rated $145.95 $135.00Read more
Sale! FORGED 80% BT-15 LOWER 5-PACK (RAW)
FORGED 80% BT-15 LOWER 5-PACK (RAW)
FORGED 80% AR-15 LOWER 5-PACKPerfect for build parties or anyone interested in adding to their AR Collection. The TB -15 80% lower receiver is machined from forged 7075 aluminum—made in USA—to mil spec tolerances, and tumble deburred. All that is left to do is machine the fire control pocket, for the trigger group and drill a few holes. Once complete you will have a fully functional BT-15 type lower.
  • This is not a completed receiver and still requires machining to be done in order to have an operational firearm.
  • NO FFL is required for purchase, item can be shipped directly to your .
  • As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968.
  • Customer is responsible for compliance with local state and federal regulations regarding any products sold on our website.
  • Our lowers have been found to be compatible with most jigs made for finishing forged style lowers, such as Tactical Machining’s, etc.
*Contact us for orders of 50-500 (or more) units.
home
not rated $589.95 $395.95Add to cart
Sale! TB-9 80% 9MM Glock Mag Billet Lower
TB-9 80% 9MM Glock Mag Billet Lower
Description 
The TB-9 Billet lower receiver is precision machined in-house from hi-grade 7075 billet master plate to milspec standards making it compatible with most milspec 9mm uppers. Features a broached mag well and milspec 8625 type III, class 2 hard anodized. All that is left to do is machine the fire control pocket, for the trigger group and drill a few holes. Once complete you will have a fully functional TB-15 type lower.The TB-9 accepts Glock OEM and after market Glock style magazines. The magazine catch is included and is machined from aluminum billet and hard coat anodized. The ejector is included and is secured with 2 set screws. The bolt catch hole is threaded and and screw for installation is included.
  • This is not a completed receiver and still requires machining to be done in order to have an operational firearm.
  • NO FFL is required for purchase, item can be shipped directly to your home.
  • As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968.
Rated 4.67 out of 5
$175.95 $149.95Add to cart