10.5″ 7.62×39 AR Barrel
10.5″ 7.62×39 AR Barrel
All of our barrels are button riffled and produced from 4150 CrMoV ( adhering to Mil-B-11595) or 416 SS 
  • 10.5" Barrel
  • 7.62×39 
  • Hbar
  • Gas System Carbine 
  • M4 Feed Ramps 
  • Gas Port 0.092″
  • Muzzle Thread 5/8×24
  • Made in America 
  • PHOSPHATE OR NITRIDE 
Rated 5.00 out of 5
$159.95Add to cart
Sale! 5.56 & 9MM Billet Assembled Side Charging Upper  Non-Reciprocating
5.56 & 9MM Billet Assembled Side Charging Upper Non-Reciprocating
5.56 & 9MM Billet Assembled Side Charging Upper  Non-Reciprocating
  • Machined from 6061 billet aluminum
  • Matte black hard-coat anodized per Mil 8625 Type 3 Class 2
  • Compatible with all standard AR-15 components and most aftermarket parts — Machined pocket to accomodate Magpul BAD Lever
  • The ONLY Non Reciprocating Side Charger on the market to accept ANY standard MILSPEC BCG — Just change out cam pin with the modified cam pin we provide
  • Adjustable tension slide lock on charging handle
  • Rear dust cover trap door that seals shut when mated with lower
  • Manufactured to MILSPEC on state of the art CNC equipment for consistent quality parts and exacting tolerances
  • Save money by building your own AR-15 rifle from the ground up exactly the way you want it configured
  • Designed to match lines with New Frontier Armory C-4 Billet Lower and most forged AR-15 Lowers
  • Ejection port cut to eject large calibers up to .458 SOCOM shells
not rated $298.95 $224.99Add to cart
Sale! 5.56 HellCat LIMITED EDITION BCG Complete Bolt carrier group
5.56 HellCat LIMITED EDITION BCG Complete Bolt carrier group
Semi-Auto/ Full Auto M16 bolt carrier group. Made using MILSPEC 8620 quality steel on in-house CNC machines. All carriers are then heat-treated, phosphate coated and each carrier is chrome-lined in the bolt throat Standard MIL-SPEC carrier with additional care taken during machining process  - Sharp edges and rough finishes eliminated. Will NOT shred fingers and operates smoothly - Phosphate coated after heat treatment  - Made of same steel and using same processes as our National Match but to standard MILSPEC design
Rated 5.00 out of 5
$169.95 $125.95Add to cart
Sale! 5.56 Y/M LIGHT WEIGHT NATIONAL MATCH BCG
5.56 Y/M LIGHT WEIGHT NATIONAL MATCH BCG
This carrier weighs 10.5 ounces which is .8 ounces less than our standard carrier. Added surface area in the front of the carrier gives a tighter fit when the bolt is in battery for more consistent lock up. The lighter weight results in less reciprocating mass for lower felt recoil. Also good for  hunters who are trying to keep the weight down. Available in 5.56 and 7.62x39
not rated $295.95 $265.95Add to cart
Sale! 7 SIDED KEYMOD RAIL SYSTEM 12.5″
7 SIDED KEYMOD RAIL SYSTEM 12.5″
DESCRIPTION 
  •   1913 Picatinny quad rail
  •   Key Mod sides
  •   6061T6 Aluminum
  •   Class III type 2 hard anodized 
  •   Laser engraved
  •   Larger barrel nut and spanner ring included
  •  Made in the USA 
not rated $209.95 $171.95Add to cart
Sale! 7 SIDED M-LOK RAIL SYSTEM 15″
7 SIDED M-LOK RAIL SYSTEM 15″
DESCRIPTION
  •  1913 Picatinny rail at 12:00 (37 slots)
  •  M-LOK rail at 1:30 (7 slots), 3:00 (8 slots), 4:30 (7 slots), 6:00 (8 slots), 7:30 (7 slots), 9:00 (8 slots), 10:30 (7 slots)
  •  16oz (with barrel nut and spanner ring)
  •  6061T6 Aluminum
  •  Class III type 2 hard anodized
  •  Laser engraved
  •  Larger barrel nut and spanner ring included
not rated $219.95 $195.95Add to cart
7.290″ Diamond Series Forearm (Carbine Length)
7.290″ Diamond Series Forearm (Carbine Length)
These unique forearms feature diamond shaped heat vents, an extended top rail for gap-free installation, “T” marked rails to mark accessory locations, they accept our end caps, and utilize our anti-rotation screws for secure installation. The forearms and barrel nuts are made of 6061-T6 aluminum and hard coated to military specifications. The jam nut and anti-rotation screws are steel and plated a matte black finish to match.Want to hide your gas block and create a longer site radius? Both a Mid length as well as a Specter length forearm will hide a Carbine length gas system built with our low profile gas block, YHM-9383 or YHM-9384
  • All assemblies include
  • One jam nut
  • One barrel nut
  • Two anti-rotation screws
  • One forearm tube
  • Overall Length 7.2 Inches. 
  • Weight 12.5 oz.
  • Hard coat Anodized matte black to Military Specifications or better 
not rated $145.95Add to cart
Sale! 7.5″ 300BO TB Delta URG upper receiver group
7.5″ 300BO TB Delta URG upper receiver group
7.5" 300BO TB Delta URG upper receiver group
  • 7" 300BO 1-10 Twist Hbar barrel 
  • Ke Arms 7" Delta P quad rail
  • YHM Low Profile Gas block 
  • Melonite Gas Tube
  • TB Upper receiver
  • Forged 7075-T6
  • Precision Machined to Mil-SPEC
  • MIL-A-8625F TYPE 3 CLASS 2 Hardcoat Anodized
  • .250" Takedown Pin Bores
  • Mil-Spec Charging Handle
  • Standard Mil-spec MP B.A.T LLC 5.56 BCG (uses standard M16- AR15 firing pin)
  • Lantac Dragon Brake 
not rated $899.95 $699.95Add to cart
Sale! 7.5″ 7.62×39 TB Delta URG upper receiver group
7.5″ 7.62×39 TB Delta URG upper receiver group
7.5" 7.62x39 TB Delta URG upper receiver group
  • 7" 7.62x39 1-10 Twist Hbar barrel 
  • Ke Arms 7" Delta P quad rail
  • YHM Low Profile Gas block 
  • Melonite Gas Tube
  • B.A.T LLC Upper receiver
  • Forged 7075-T6
  • Precision Machined to Mil-SPEC
  • MIL-A-8625F TYPE 3 CLASS 2 Hardcoat Anodized
  • .250" Takedown Pin Bores
  • Mil-Spec Charging Handle
  • Standard Mil-spec MP B.A.T LLC 7.62x39 BCG (uses standard M16- AR15 firing pin)
  • Lantac Dragon Brake 
not rated $899.95 $699.95Add to cart
Sale! 7.62×39 10.5″ AR15 Upper Receiver
7.62×39 10.5″ AR15 Upper Receiver
T.B. 7.62×39 10.5″ These uppers are coming with our new 308 brake
  • 10.5″ 7.62×39 1-10 Twist Hbar barrel 
  • SMF Tactical 10" rail
  • YHM Low Profile Gas Block 
  • Melonite Gas Tube
  • B.A.T LLC Upper Receiver 
  • Forged 7075-T6
  • Precision Machined to Mil-SPEC
  • MIL-A-8625F TYPE 3 CLASS 2 Hardcoat Anodized
  • .250″ Takedown Pin Bores
  • Mil-Spec Charging Handle
  • Standard  Mil-spec MP T.B. 7.62×39 BCG (uses standard M16- AR15 firing pin)
not rated $950.95 $725.95Add to cart
Sale! 7.62×39 Entry Level Upper Receiver Group
7.62×39 Entry Level Upper Receiver Group
Entry level 7.62x39 
  • 16" M4 profile Barrel
  • 1-10 twist rate
  • Low profile gas block
  • 2 piece hand guard
  • TB Upper receiver
  • Forged 7075-T6
  • Precision Machined to Mil-SPEC
  • MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized
  • .250″ Take down Pin Bores
  • Mil-Spec Charging Handle
  • Standard Mil-spec MP tb 7.62×39 BCG
  • A2 Birdcage 
not rated $450.95 $410.95Add to cart
Sale! 7.62X39 HBAR 16″ BARREL
7.62X39 HBAR 16″ BARREL
All of our barrels are button riffled and produced from 4150 CrMoV ( adhering to Mil-B-11595) or 416 SS 
  • 7.62x39 
  • Hbar
  • Gas System Carbine 
  • M4 Feed Ramps 
  • Gas Port 0.092"
  • Muzzle Thread 5/8x24
  • Made in America 
  • PHOSPHATE OR NITRIDE 
not rated $185.95 $115.95Add to cart