Bolt Carrier Group
Showing all 9 results
Sale!
not rated
$275.95 $205.95
Add to cart

.308 Bolt Carrier Group
This bolt carrier group has everything you need to complete your LR308, or your LR308 upper receiver build. Phosphate finish.
- Type: Bolt Carrier Group
- Caliber: 308
- Finish: Phosphate
- Designed for LR308 Platform
- NOTE: This Carrier Does Not Have Serrations for a Forward Assist
- Made in the USA
Sale!
$169.95 $125.95
Add to cart

5.56 HellCat LIMITED EDITION BCG Complete Bolt carrier group
Semi-Auto/ Full Auto M16 bolt carrier group. Made using MILSPEC 8620 quality steel on in-house CNC machines. All carriers are then heat-treated, phosphate coated and each carrier is chrome-lined in the bolt throat
Standard MIL-SPEC carrier with additional care taken during machining process
- Sharp edges and rough finishes eliminated. Will NOT shred fingers and operates smoothly
- Phosphate coated after heat treatment
- Made of same steel and using same processes as our National Match but to standard MILSPEC design
Sale!
not rated
$295.95 $265.95
Add to cart

5.56 Y/M LIGHT WEIGHT NATIONAL MATCH BCG
This carrier weighs 10.5 ounces which is .8 ounces less than our standard carrier. Added surface area in the front of the carrier gives a tighter fit when the bolt is in battery for more consistent lock up. The lighter weight results in less reciprocating mass for lower felt recoil. Also good for hunters who are trying to keep the weight down.
Available in 5.56 and 7.62x39
Sale!
not rated
$199.95 $195.95
Read more

Balanced Bolt Carrier Group Complete
|
Sale!
not rated
$285.95 $270.95
Read more

LANTAC .223/5.56X45MM Enhanced Full Auto Bolt Carrier Group NiB Coated
LANTAC E-BCG, Enhanced Bolt Carrier Group.
M16 Full Auto Style for increased mass and lock time.
Our new BCG is precision machined from 8620 Steel with a shot peened bolt manufactured from Carpenter 158 and Magnetically Particle Inspected.
The entire carrier assembly is NiB, Electroless Nickel Boron coated with the patented, advanced UCT EXO process, unlike standard NiB coatings.
This offers extreme lubricity with a friction coefficent of .02 and surface hardness of 82-85 Rockwell C.
The carriers patent pending design features unique shrouded and forward facing gas ports that have also been re sized so that gas is vented differently to a standard carrier.
This results in a system that runs flatter with a smoother energy pulse.
In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel.
The flared boss at the tail of the carrier enhances the BCG's lock position within the upper and makes it more consistent, resulting in an accuracy improvement.
All critical dimensions are hard turned / ground after heat treat and the bore of the carrier and gas key have been hard chrome lined for the best possible wear resistance.
All E-BCG's feature the LANTAC CP-R360 patent pending domed cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx).
The ultra smooth head reduces wear within the upper receiver.
The BCG's 11.7oz weight helps to increase lock time and smoother operation.
Gas keys are properly staked at four points and only grade 8 fasteners are used in assembly.
The E-BCG's forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors.
However, it should be noted that the E-BCG is not a complete solution for this issue and all rifles are different. 'Over Gassed' guns will suffer to a larger extent from this problem.
- Weight 11.7oz
- Forward Porting, enlarged vents.
- Balanced flared boss.
- 8620 Carrier, Heat Treated, Hard Turned, Chrome Lined
- MPI Carpenter 158 Bolt, Shot Peened, Hard Turned / Ground.
- NiB UCT EXO Coating.
- CP-R360 Domed Cam Pin
- Mil-Spec Gas Rings
- Mil-Spec Staked Gas Key
- Grade 8 Hardened Fasteners
- All Hard Chrome surfaces are to MIL-STD-171 1.2.2.2
- Shot Peening is conducted with S110 shot, Established by Almen Gage A-2 strip .006 -.008
- Lifetime Warranty.
- Made in the USA.
Sale!
not rated
$220.95 $170.95
Add to cart

Standard M16 Bolt Carrier Complete / Phosphate 7.62×39
Standard AR Bolt Carrier Group for 7.62x39
As with all of our carriers we leave material on all critical areas then send them out for heat treat. Next we precision grind the carrier inside and out to remove any distortion caused by the heat treat process. All of our standard carriers have 30% wider rails than the typical Mil Spec carrier to give you more contact area in the upper receiver.
Weight: 11.3 ounces. Available in AR15 or M16 type.
Sale!
not rated
$285.95 $265.95
Read more

YM SLC Super Light Carrier Complete (Chrome Only) 5.56
SLC Super Light Carrier, Complete This Carrier is manufactured for the 3 gun shooter or anyone who wants a lighter recoil. Uses a standard recoil buffer and spring. The weight of this complete assembly is 9.2 ounces. Our standard carrier weighs 11.3 ounces for your comparison.You will be amazed at the difference in felt recoil! AVAILABLE IN CHROME ONLY. AR15 ONLY. 5.56 300BO

YM Standard M16 Bolt Carrier Complete / Phosphate
Y/M standard AR Bolt Carrier Group
As with all of our carriers we leave material on all critical areas then send them out for heat treat. Next we precision grind the carrier inside and out to remove any distortion caused by the heat treat process. All of our standard carriers have 30% wider rails than the typical Mil Spec carrier to give you more contact area in the upper receiver.
Weight: 11.3 ounces. Available in AR15 or M16 type.