Description
Back to Barrels
10.5″ 7.62×39 AR Barrel
$159.95
All of our barrels are button riffled and produced from 4150 CrMoV ( adhering to Mil-B-11595) or 416 SS
- 10.5″ Barrel
- 7.62×39
- Hbar
- Gas System Carbine
- M4 Feed Ramps
- Gas Port 0.092″
- Muzzle Thread 5/8×24
- Made in America
- PHOSPHATE OR NITRIDE
Related products
ELF Match Trigger
The ELF Drop-In Match Trigger has been built for performance. The only AR-
15 trigger using aircraft needle bearings, making for an incredibly smooth and
fast trigger pull. Pull weight is so easy to adjust it can be done in seconds
without removing the trigger from your lower receiver. A second-to-none AR-
15 drop-in trigger system that is strong and light, made of wire EDM
machined, hardened A2 tool steel and lightweight aircraft-grade aluminum.
Installation can be done in minutes using your AR’s original hammer and
trigger pins. The match trigger may be ordered with a curved or straight shoe.
The amazingly short takeup, glass-rod crisp break and next to zero over-travel
can be compared to the finest custom 1911 triggers. Adjustability puts you in
charge based on your current use. If you are looking for the finest adjustable
trigger for your AR-15 platform, this is the trigger system for you.
Product Description
Fits any mil-spec AR-15 (Large pin Colt available)
Absolutely Drop-Safe regardless of pull-weight
Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger,
providing a great combination of speed and accuracy
Adjustable from 4lbs to 2 1/2lbs without removing from lower
Full power hammer spring ensures proper ignition of primer
Very short pull and reset allows for rapid follow up shots and greater accuracy
Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight
aircraft-grade aluminum and hardened steel
Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing
High performance trigger and hammer needle bearings for smoother and faster firing
Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters,
military, law enforcement, and disabled veterans
100% made in America with a Lifetime Guarantee!
ELF X2 TRIGGER
ELF X2 TRIGGER
With all the same great craftsmanship and features of the Elf 3-gun trigger,
The new ELF Drop-In X-2 Trigger has been built for performance. The only
AR-15 trigger using aircraft needle bearings, making for an incredibly smooth
and fast trigger pull. Using two fingers together for a precise shot gives a pull
weight as low as <1.5lbs per finger. Alternating fingers enables firing an
average of 20% faster. Pull weight is so easy to adjust it can be done in
seconds without removing the trigger from your lower receiver. A second-tonone
AR-15 drop-in trigger system that is strong and light, made of wire EDM
machined, hardened A2 tool steel and lightweight aircraft-grade aluminum.
Installation can be done in minutes using your AR’s original hammer and
trigger pins.
The amazingly short takeup, glass-rod crisp break and next to zero over-travel
can be compared to the finest custom 1911 triggers. Adjustability puts you in
charge based on your preference. If you are looking for a unique adjustable
trigger that allows rapid fire as well as unmatched precision, this is the trigger
system for you.
Fits any mil-spec AR-15 with removable trigger guard.(Large pin Colt available)
Absolutely Drop-Safe regardless of pull-weight
Easily adjustable from without removing from lower
Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters,
hunters, military, law enforcement and disabled veterans.
Very short pull and reset allows for rapid follow up shots and greater accuracy
Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight
aircraft-grade aluminum and hardened steel
Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing
High performance trigger and hammer needle bearings for smoother and faster firing
100% made in America with a Lifetime Guarantee!
YM Standard M16 Bolt Carrier Complete / Phosphate
Y/M standard AR Bolt Carrier Group
As with all of our carriers we leave material on all critical areas then send them out for heat treat. Next we precision grind the carrier inside and out to remove any distortion caused by the heat treat process. All of our standard carriers have 30% wider rails than the typical Mil Spec carrier to give you more contact area in the upper receiver.
Weight: 11.3 ounces. Available in AR15 or M16 type.
Sale!
not rated
$135.95 $85.95
Add to cart
Billet 80% AR LOWER
- This is not a completed receiver and still requires machining to be done in order to have an operational firearm.
- NO FFL is required for purchase, item can be shipped directly to your home.
- As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968.
- Customer is responsible for compliance with local state and federal regulations regarding any products sold on our website.
- Our lowers have been found to be compatible with most jigs made for finishing forged style lowers
Hoang Nguyen (verified owner) –
This is great barrel for your AR15 project. I manage to make it work with the Adam Arms piston system.
Thank you for the fast delivery and plan to buy again for the next build.