Back to Barrels
.308 18″ RIFLE-LENGTH BARREL FLUTED SPIRAL
- 18″ 4150 CMV Steel
- Mid-Length Gas System
- 1 x 10 twist rate
- 750″ diameter gas block seat
- 5/8″ x 24 threaded muzzle
- Includes M4 feed ramped extension (nickel boron)
- H-Bar Contour: Spiral Fluted, National Match Barrel, Medium Weight, 18″ long, black phosphate finish. Fluting provides weight savings & rigidity.
- Weight: 3 lbs
- Will Ship in 1-2 Weeks
Out of stock
Add to cart
20″ 308 DPMS HIGH KEYMOD RAIL
20" 308 DPMS HIGH KEYMOD RAIL The only 20" rail on the market Now available in M-LOK pattern just add in the notes M-Lok In stock shipping 4-7 Business days Brand new AR10 308 handguard 20" key mod high profile. This is the only 20" on the market. This handguard was made for 20"-26" barrels. this is longest lightest weight free-float handguards on the market, without sacrificing strength or structural integrity, and takes advantage of the new industry standard KeyMod mounting system. Fits current DPMS spec (high profile) receivers. Incredibly lightweight: 20 inch models -18 oz. Extremely solid lock up Monlolithic type continuous MIL-STD 1913 top rail, T-marked for accessory location Lightweight, rugged construction from T-6 6061 aluminum, hard coat anodized Mil-Spec Picatinny Continuous Top Rail Mil-Spec Picatinny on Front Bottom Rail Mounting Point Type III Hard Coat Anodized "Fits High Profile” upper receiver has a 3/16" wide top portion where the charging handle is installed.
- 20" Keymod Rail
- T-6 6061
- barrel nut induced
- American made
- Weight 18 oz
Rated 5.00 out of 5
MAGPUL MOE Slim Line Adjustable
- Sloping cheek weld combines a slim profile with user comfort
- Dual-side release latch provides easy adjustment while remaining anti-snag
- Premium chrome-silicon lock spring provides positive locking and long service life|Internal anti-rattle feature minimizes wobble on receiver extension tube
- Rubber butt-pad offers an anti-slip surface and increases impact protection
- Rollover on the toe allows for easier shoulder transitions and better fit when using body armor
- Compatible with Magpul ASAP, ASAP-QD, and other receiver-mount sling attachments
not rated $38.99 Read more
6.8mm/7.62mm/9mm, 5C2 Comp/Flash Hider (1/2″-36)
The popular 5C2 Flash Hider has been redesigned to work with the 6.8mm SPC cartridge, 7.62X39mm cartridge and 9mm cartridge. This 5 port design has no downward facing port which helps eliminate dust problems when shooting in the prone position. This flash hider keeps the aggressive front end for use in hand to hand situations.
- For 1/2"-36 threaded barrels only. Includes crush washer.
Add to cart
ELF 3-Gun Trigger
The ELF Drop-In 3-Gun Trigger has been built for winning competitions. The only AR-15 trigger using aircraft needle bearings, making for an incredibly smooth and fast trigger pull. The skeletonized hammer combined with our exclusive .043 double double wound polished piano wire hammer spring make for the fastest lock time on the planet. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The 3-Gun trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your preference. If you are looking for the finest adjustable trigger for your competition AR-15 platform, this is the trigger system for you. Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 1/2lbs without removing from lower Exclusive double double wound hammer spring and skeletonized hammer ensure a lock time second to none. Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing A competition trigger that leaves all others behind 100% made in America with a Lifetime Guarantee!