Sale!

80% 9mm AR15 lower Colt Slim Black Anodized

Rated 5.00 out of 5 based on 4 customer ratings
(4 customer reviews)

$165.95 $120.95

80% 9mm AR15 lower Colt Slim Black Anodized

  • Gen 2
  • Uses Colt magazines
  • Features last round bolt hold open
  • Made from 7075-T6 forging and machined to mil-spec
  • This receiver takes Colt Magazines
  • MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized
  • Slim magwell
  • MADE IN USA

https://thebuffalo.us/shop/9mm-builders-kit/

  • We choose the 7075-T6 because it is one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent and it is ideally used for highly stressed parts.

Description

80% 9mm AR15 lower slim Black Anodized

Buy a USA Made 80% 9mm AR15 lower Colt slim Black Anodized from The Buffalo

Looking for a top quality 80 percent 9mm AR15 lower slim Black Anodized stripped lower receiver for AR15? Look no further. Made from 7075-T6 forging and machined to mil-spec. as well as being MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized. We selectively choose the 7075-T6 because it is one of the highest strength aluminum alloys available. In addition, its strength-to-weight ratio is excellent and it is ideally used for highly stressed parts. Our customers should know that we also carry the LPK and Magazines for the 9mm and this receiver conveniently takes Colt Magazines. Order today while supplies last!

AR 9mm 80% AR 9mm 80% AR 9mm 80%

4 reviews for 80% 9mm AR15 lower Colt Slim Black Anodized

  1. Rated 5 out of 5

    Ken W

    Been using these since The Buffalo came out with their gen2. Absolutely love this product the set screw make for an easy build. Love my Colt style AR 9

  2. Rated 5 out of 5

    Rick Hensser (verified owner)

    Ordered This dedicated colt 9mm lower and kit this was my first 9mm build ,Anthony is very helpful.The lowwer is of the highest quality the anodized finish is of a much better quality than other 80% lowers I have purchased.This lowwer uses Alan screw to hold the bolt carrier catch which makes assembly much easier than driving a pin in,it also has a screw to take any play between the upper and lowwer receiver out,that’s a quality touch couldn’t be more happier with this lowwer and kit,I will be getting my next build parts here.

    • admin

      Rick thank you again for the kind word. Hope you enjoy the product come back anytime

  3. Rated 5 out of 5

    Carlton Martin (verified owner)

    I talked to Anthony about the Colt AR9 80% lower and complete parts kit. He listened to what I needed and didn’t try to push me into something else as I’ve experienced through a couple other dealers. He didn’t pretend to know more than he did. I could tell he had his act together and knew exactly what he was talking about without the B.S. I ordered from him today, mainly because of his knowledge and great personality. I haven’t received my items, since I just ordered, but think I’ll be writing a review later about the quality of the items and service I received. Thank you Anthony!

  4. Rated 5 out of 5

    Chris B. (verified owner)

    This lower met and exceeded my expectations. Before I purchased the lower and the 9mm parts kit, I called and spoke with Anthony regarding some more technical aspects of his product, which was in regard to a special build I was embarking on. He was very informative, answered all my questions, and offered to help in anyway that he could. I tell ya, having customer service like this, especially in the industry, sets him apart from the others. The special project has to do with a PPS-43 magazine, and the 22 TCM round. Needless to say, this was the perfect lower for the project, and has worked out quite nicely in the end. If you’re on the fence about this product, don’t be! It’s well made, and backed by excellent service! I’ll be coming back for all my future build needs. Thank you Anthony.

    • admin

      Chris,
      Thank you for the kind words dont be a stranger call us any time.
      Thanks,
      The Buffalo

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Sale! 9MM BOLT ASSEMBLY
9MM BOLT ASSEMBLY – Custom Engraved BULLET BILL
9MM BOLT ASSEMBLY – Custom Engraved BULLET BILL
  • Custom Engraved BULLET BILL logo
  • Precision machined from high-grade 8620 Steel
  • One-piece design, bolt and carrier combined
  • Staked-on carrier key.
  • Phosphate finish
not rated $260.95 $215.95Add to cart
Sale! 9mm BCG Hybrid
9mm BCG Hybrid
The Hybrid 9mm BCG will work with both Colt and Glock AR15 style builds
This  Enhanced 9mm bolt assembly is complete and ready to drop into your 9mm upper
This unit is ramped for use with a standard AR or M16 hammer;
not rated $225.95 $155.95Add to cart
Sale! 9mm 10.5″ Threaded Barrel
9mm 10.5″ Threaded Barrel
  • Surface: Smooth
  • Length: 10.5"
  • Weight: 1.22 lbs.
  • Material: 4140 Chrome Moly Steel
  • Chamber: 9 x 19mm
  • Twist Rate: 1 in 14"
  • Chrome Lined: No
  • Finish: Melonite QPQ
  • M4 Feed Ramps: No
  • Muzzle Thread Pattern: 1/2"-36
  • Gas Block Location: Carbine
  • Exterior Diameter at Gas Block: 0.750"
This YHM barrel features a 9x19mm chamber. Constructed of 4140 chrome moly steel with a threaded muzzle, the barrel is Melonited for ultimate surface protection. The melonite coating provides a thinner surface than chrome-lining, so bore friction is reduced for better accuracy. In addition, melonite is harder than chrome-lining providing a longer wear life. The use of this barrel on an AR Pistol is legal, but the use of this barrel on any AR15 rifle/carbine will qualify the firearm as an SBR and the firearm needs to be registered as such.
not rated $181.99 $125.95Add to cart
Sale! 9MM Builders Kit
9MM Builders Kit
NOW WITH LAST ROUND BOLD HOLD OPENThese will only work with our 9mm AR 80% lowersKit Includes:
  • Set Screws
  • Grooved Feed Ramp
  • Ejection Kit
Rated 5.00 out of 5
$75.95 $55.95Add to cart
Sale! 9mm 5.5″ AR15 Modern Series Barrel
9mm 5.5″ AR15 Modern Series Barrel

Description

Ballistic Advantage 9mm chambered 5.5 inch Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and 1/2-28 profile threads.
  • Designed to work with both Colt/RR and Glock style AR builds.
  • Compatible with standard mil-spec uppers. There are also numerous dedicated 9mm upper options that work.
  • Requires the use of a unique magwell conversion (Colt/Rock River style) with UZI mags or a dedicated 9mm lower with Glock mags.
  • 9mm on an AR15 platform operates by blowback and does not need a gas block or gas tube.
  • Threaded 1/2×28 instead of 1/2×36 to give you greater versatility when choosing a suppressor.
  • Integrated feed ramp and barrel extension.
  • Since the “barrel extension” is an integral part of the barrel, the length stated is the true overall length. For example, an 11” 9mm barrel has the same outer dimensions/length as a 10.5” 5.56 barrel.
  • IMPORTANT: A standard 1/2×28 flash hider will not have enough clearance for a 9mm round to pass.
  • Before installing a muzzle device, ensure a 9mm round will drop freely through the muzzle device bore.
You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Possession of this barrel along with a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm.
not rated $105.95 $85.95Read more
Sale! 80% 9mm AR15 lower Slim Raw
80% 9mm AR15 lower Slim Raw
80% 9mm AR15 lower Slim Raw You will need to buy one of our 9mm finishing parts kit  https://thebuffalo.us/shop/9mm-builders-kit/
  • Gen 2 special pricing til years end
  • Made from 7075-T6 forging and machined to mil-spec
  • This receiver takes Colt Magazines
  • MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized
  • Uses Standard AR15 M16 Bolt release
  • Last round bolt hold open
  • Slim magwell
  • MADE IN USA
  • We choose the 7075-T6 because it is one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent and it is ideally used for highly stressed parts.

Rated 5.00 out of 5
$150.95 $115.95Add to cart