Back to 80 Percent Lowers
Sale!
80% 9mm AR15 lower Black Anodized
80% 9mm AR15 lower Black Anodized

80% 9mm AR15 lower Black Anodized

$150.95 $110.95

AR15 9MM 80% Lower Receiver Stripped

  • Made from 7075-T6 forging and machined to mil-spec
  • We also carry the LPK and Magazines for the 9mm
  • This receiver takes Colt Magazines
  • MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized
  • MADE IN USA

 Please check out our Gen 2 slim Colt AR9 80% lowers with last round bolt hold open.

https://thebuffalo.us/shop/80-9mm-ar15-lower-slim-black-anodized-2/

  • We choose the 7075-T6 because it is one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent and it is ideally used for highly stressed parts.

Out of stock

SKU: BAT9MM80F Categories: , Tags: , ,

Description

80% 9mm AR15 lower Black Anodized

Buy a USA Made 80% 9mm AR15 lower Black Anodized from The Buffalo

Looking for a top quality 80 percent 9mm AR15 lower Black Anodized stripped lower receiver for AR15? Look no further. Made from 7075-T6 forging and machined to mil-spec. as well as being MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized. We selectively choose the 7075-T6 because it is one of the highest strength aluminum alloys available. In addition, its strength-to-weight ratio is excellent and it is ideally used for highly stressed parts. Our customers should know that we also carry the LPK and Magazines for the 9mm and this receiver conveniently takes Colt Magazines. Order today while supplies last!

IMG_2784 IMG_2785 IMG_2786 IMG_2787

Reviews

There are no reviews yet.

Be the first to review “80% 9mm AR15 lower Black Anodized”

Your email address will not be published. Required fields are marked *

You may also like…

Sale! 9mm 5.5″ AR15 Modern Series Barrel
9mm 5.5″ AR15 Modern Series Barrel

Description

Ballistic Advantage 9mm chambered 5.5 inch Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and 1/2-28 profile threads.
  • Designed to work with both Colt/RR and Glock style AR builds.
  • Compatible with standard mil-spec uppers. There are also numerous dedicated 9mm upper options that work.
  • Requires the use of a unique magwell conversion (Colt/Rock River style) with UZI mags or a dedicated 9mm lower with Glock mags.
  • 9mm on an AR15 platform operates by blowback and does not need a gas block or gas tube.
  • Threaded 1/2×28 instead of 1/2×36 to give you greater versatility when choosing a suppressor.
  • Integrated feed ramp and barrel extension.
  • Since the “barrel extension” is an integral part of the barrel, the length stated is the true overall length. For example, an 11” 9mm barrel has the same outer dimensions/length as a 10.5” 5.56 barrel.
  • IMPORTANT: A standard 1/2×28 flash hider will not have enough clearance for a 9mm round to pass.
  • Before installing a muzzle device, ensure a 9mm round will drop freely through the muzzle device bore.
You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Possession of this barrel along with a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm.
not rated $105.95 $85.95Add to cart
Sale! 9MM Builders Kit
9MM Builders Kit
NOW WITH LAST ROUND BOLD HOLD OPENThese will only work with our 9mm AR 80% lowersKit Includes:
  • Set Screws
  • Grooved Feed Ramp
  • Ejection Kit
Rated 5.00 out of 5
 $75.95 $55.95Add to cart
Sale! TB-9 80% 9MM Glock Mag Billet Lower
TB-9 80% 9MM Glock Mag Billet Lower
Description
The TB-9 Billet lower receiver is precision machined in-house from hi-grade 7075 billet master plate to milspec standards making it compatible with most milspec 9mm uppers. Features a broached mag well and milspec 8625 type III, class 2 hard anodized. All that is left to do is machine the fire control pocket, for the trigger group and drill a few holes. Once complete you will have a fully functional TB-15 type lower.The TB-9 accepts Glock OEM and after market Glock style magazines. The magazine catch is included and is machined from aluminum billet and hard coat anodized. The ejector is included and is secured with 2 set screws. The bolt catch hole is threaded and and screw for installation is included.
  • This is not a completed receiver and still requires machining to be done in order to have an operational firearm.
  • NO FFL is required for purchase, item can be shipped directly to your home.
  • As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968.
Rated 4.67 out of 5
 $175.95 $155.95Add to cart
Sale! AR15 80% 9mm Dedicated Billet Lower Glock Mag W/ Kit
AR15 80% 9mm Dedicated Billet Lower Glock Mag W/ Kit
These are 80% Gun Point Custom Glock 9mm Billet lower receivers. The Buffalo has an exclusive on this lower.  These are a dedicated 9mm Billet design that comes with all the features in the top of the line Gun Point model but in an 80% configuration. These lowers have all the key features you would expect from a high end manufacturer.NO ROLL PINS!! The roll pin has been replaced with a set screw to eliminate the need of beating on the lower receiver. The rear take down pin detent spring is also held in with a set screw making it easier for you to change buffer tubes. The receiver tension set screw effectively eliminates any unwanted “slop” between upper and lower receivers for superior accuracy.No FFL required. As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968. We have the ability ship to your door because 80% lowers are not considered firearms by the ATF. Lead time: May very depending on volume of orders at the time placed
Rated 5.00 out of 5
 $209.99 $200.99Add to cart

Related products

Sale! 1911 80 Tactical Frame
1911 80% Tactical Frame
  • 80% 1911 Tactical 80 Series Stainless Steel Frame with front Rail 
  • 1911 Frame precision machined 
  • Tactical style frame
  • Stainless Steel
  • Standard Trigger Guard
  • Non FFL Item
  • MADE IN USA
not rated $265.95 $169.95Read more
Sale! Billet 80% MA.308 LOWER (ANODIZED)
Billet 80% MA.308 LOWER (ANODIZED)
Billet 80% MA.308 LOWER (ANODIZED) DESCRIPTION
The TB .308 80% lower receiver is precision 3-D machined from billet  7075 aluminum—made in USA—to mil spec tolerances, finish options are: tumble de-burred, bead blast finished and Mil 8625 Type III, Class 2 anodized. All that is left to do is machine the fire control pocket, for the trigger group and drill a few holes. Once complete you will have a fully functional TB.308 DPMS pattern lower receiver for .308 / 7.62x51 NATO, compatible with DPMS platform upper receivers, Magpul, SR-25 & DPMS LR-308 Magazines. Includes integrated trigger guard. - This is not a completed receiver and still requires machining to be done in order to have an operational firearm. - NO FFL is required for purchase, item can be shipped directly to your home. - As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968.
not rated $145.95 $135.00Read more
Sale! FORGED 80% AR-15 LOWER RECEIVER STATE OF JEFFERSON
FORGED 80% AR-15 LOWER RECEIVER STATE OF JEFFERSON
FORGED 80% AR-15 LOWER RECEIVER STATE OF JEFFERSON
  • Solid 7075-T6 forged aluminum
  • Mil-spec design and compatibility ensures maximum rifle customization
  • Standard Broached pre-cut magazine well
  • Receiver extension and grip screw hole drilled and threaded
  • Rear take down lug pocket completed
  • Laser Engraved Bullet Pictogram selector markings on both sides
  • MADE IN THE U.S.A.

No FFL required. As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968. We have the ability ship to your door because 80% lowers are not considered firearms by the ATF.  

not rated $125.95 $75.95Add to cart
Sale! 80% 9mm AR15 lower Slim Raw
80% 9mm AR15 lower Slim Raw
80% 9mm AR15 lower Slim Raw You will need to buy one of our 9mm finishing parts kit  https://thebuffalo.us/shop/9mm-builders-kit/
  • Gen 2 special pricing til years end
  • Made from 7075-T6 forging and machined to mil-spec
  • This receiver takes Colt Magazines
  • MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized
  • Uses Standard AR15 M16 Bolt release
  • Last round bolt hold open
  • Slim magwell
  • MADE IN USA

  • We choose the 7075-T6 because it is one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent and it is ideally used for highly stressed parts.

Rated 5.00 out of 5
 $150.95 $115.95Add to cart