Back to Drop in triggers
Sale!
ELF 3-Gun Trigger

ELF 3-Gun Trigger

$275.95 $245.95

The ELF Drop-In 3-Gun Trigger has been built for winning competitions. The
only AR-15 trigger using aircraft needle bearings, making for an incredibly
smooth and fast trigger pull. The skeletonized hammer combined with our
exclusive .043 double double wound polished piano wire hammer spring make
for the fastest lock time on the planet. Pull weight is so easy to adjust it can be
done in seconds without removing the trigger from your lower receiver. A
second-to-none AR-15 drop-in trigger system that is strong and light, made of
wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade
aluminum. Installation can be done in minutes using your AR’s original
hammer and trigger pins. The 3-Gun trigger may be ordered with a curved or
straight shoe.
The amazingly short takeup, glass-rod crisp break and next to zero over-travel
can be compared to the finest custom 1911 triggers. Adjustability puts you in
charge based on your preference. If you are looking for the finest adjustable
trigger for your competition AR-15 platform, this is the trigger system for you.

 

 

Fits any mil-spec AR-15 (Large pin Colt available)
Absolutely Drop-Safe regardless of pull-weight
Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger,
providing a great combination of speed and accuracy
Adjustable from 4lbs to 2 1/2lbs without removing from lower
Exclusive double double wound hammer spring and skeletonized hammer ensure a lock time
second to none.
Very short pull and reset allows for rapid follow up shots and greater accuracy
Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight
aircraft-grade aluminum and hardened steel
Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing
High performance trigger and hammer needle bearings for smoother and faster firing
A competition trigger that leaves all others behind
100% made in America with a Lifetime Guarantee!

SKU: ELF3G Category: Tags: , , , , , , ,

Description

ELF 3-Gun Trigger

Buy a Premium USA ELF 3-Gun Trigger at The Buffalo

Looking for the best USA made drop in triggers? You’ve found the right place. Whether you’re in need of a 3 gun trigger, AK drop in trigger, AR10/.308 drop in trigger, match trigger, service trigger, X2 trigger or more; The Buffalo has you covered. Finding the best USA made 3-gun trigger for your next build stops here. Have questions or need assistance choosing the best rifle trigger to best suit your needs? Call us anytime at 805-206-6705 and one of our experienced specialists will get you pointed in the right direction. If you’re ready to go with this ELF 3-Gun trigger, simply order online from The Buffalo today.

3-gun_Trigger_SC.600x450FeaturesBearings.800x600.

Reviews

There are no reviews yet.

Be the first to review “ELF 3-Gun Trigger”

Your email address will not be published. Required fields are marked *

You may also like…

Elftmann Anti Walk pins
Elftmann Anti Walk pins
Elftmann Anti Walk pins So easy to install, it takes just seconds to protect your AR-15 or irreplaceable M-16 receiver. Installs by simply clipping master link over protective plate. .154 Diameter Black Oxide Finish
not rated $20.95 Add to cart

Related products

Sale! KE ARMS DUTY TRIGGER BLACK
KE ARMS DUTY TRIGGER BLACK
- 4.5 LBS adjustable reset - Minimal takeup, overtravel and reset - Precision EDM wired from A2 tool steel - Titanium Nitride coated - Simple drop-in installation
$190.95 $165.95 Add to cart
7.290″ Diamond Series Forearm (Carbine Length)
7.290″ Diamond Series Forearm (Carbine Length)
These unique forearms feature diamond shaped heat vents, an extended top rail for gap-free installation, “T” marked rails to mark accessory locations, they accept our end caps, and utilize our anti-rotation screws for secure installation. The forearms and barrel nuts are made of 6061-T6 aluminum and hard coated to military specifications. The jam nut and anti-rotation screws are steel and plated a matte black finish to match. Want to hide your gas block and create a longer site radius? Both a Mid length as well as a Specter length forearm will hide a Carbine length gas system built with our low profile gas block, YHM-9383 or YHM-9384
  • All assemblies include
  • One jam nut
  • One barrel nut
  • Two anti-rotation screws
  • One forearm tube
  • Overall Length 7.2 Inches. 
  • Weight 12.5 oz.
  • Hard coat Anodized matte black to Military Specifications or better 
not rated $145.95 Add to cart
Sale! ELF-SE drop-in trigger
ELF-SE drop-in trigger
The ELF-SE Drop-In Trigger maintains the Elftmann reputation for quality, craftsmanship and customer service in an affordable package.  The mid-weight  hammer combined with our exclusive .043 double double wound polished piano wire hammer spring provide reliable ignition and fast lock time.  Made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum.    Extremely short takeup, clean crisp break and very short, positive reset. Non -adjustable 3.5lb pull weight, non-skeletonized trigger shoe and no bearings...but we’ll put it up against any trigger made - except our performance series utilizing sealed bearings.   Ultra-Light housing is standard - Total physical weight of entire unit is just 2.3oz   Available with a curved or straight shoe.
not rated $169.00 $159.00 Add to cart
ELF Service Trigger
ELF Service Trigger
The ELF Drop-In service Trigger has been built for law enforcement and military duty. The only AR-15 trigger using aircraft needle bearings, making for an incredibly smooth and fast trigger pull. The heavy hammer combined with our exclusive .043 double double wound polished piano wire hammer spring ensure full ignition of any ammo including .308 and 7.62x39. Pull weight from 4lbs to 7lbs is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 dropin trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The Service trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your preference. If you are looking for the finest adjustable trigger for your service AR-15 platform, this is the trigger system for you.   Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Adjustable from 4lbs to 7lbs without removing from lower Exclusive double double wound hammer spring and heavy hammer ensure proper ignition of any ammunition Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing 100% made in America with a Lifetime Guarantee!
not rated $255.95 Add to cart