Back to Drop in triggers
ELF AR-10/.308 Trigger

ELF AR-10/.308 Trigger

$255.95

ELF AR-10/.308 Trigger – The Buffalo

The ELF Drop-In AR-10 Trigger has been built to withstand the punishment of
high powered calibers. The only AR-15 trigger using aircraft needle bearings,
making for an incredibly smooth and fast trigger pull. The heavy hammer
combined with our exclusive .043 double double wound polished piano wire
hammer spring ensure full ignition of any ammo including .308 and 7.62×39.
Pull weight from 2 3/4lbs to 4lbs is so easy to adjust it can be done in seconds
without removing the trigger from your lower receiver. The AR-10 trigger is
essentially the service trigger with a lighter pull weight range.
A second-to-none AR-15 drop-in trigger system that is strong and light, made
of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade
aluminum. Installation can be done in minutes using your AR’s original
hammer and trigger pins. The AR-10 trigger may be ordered with a curved or
straight shoe.
The amazingly short takeup, glass-rod crisp break and next to zero over-travel
can be compared to the finest custom 1911 triggers. Adjustability puts you in
charge based on your preference. If you are looking for the finest adjustable
trigger for your service AR-15 platform, this is the trigger system for you.

Product Description

Fits any mil-spec AR-15 (Large pin Colt available)
Absolutely Drop-Safe regardless of pull-weight
Adjustable from 2 3/4lbs to 4lbs without removing from lower
Exclusive double double wound hammer spring and heavy hammer ensure proper ignition of
any ammunition
Very short pull and reset allows for rapid follow up shots and greater accuracy
Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight
aircraft-grade aluminum and hardened steel
Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing
High performance trigger and hammer needle bearings for smoother and faster firing
100% made in America with a Lifetime Guarantee!

 

SKU: ELF308 Category: Tags: , , , , ,

Description

ELF 3-Gun Trigger

Buy a Premium USA Made ELF AR-10/.308 Trigger at The Buffalo

Looking for the best USA made ELF AR-10/.308 Trigger for your AR-10? You’ve come to the right site! Whether you’re in need of a standard 3 gun trigger, AK drop in trigger, AR10/.308 drop in trigger, match trigger, service trigger, X2 trigger or more; The Buffalo has you covered. Finding the best USA made ELF AR-10/.308 Trigger for your next new AR stops here. Have questions or need assistance choosing the best drop in trigger to best suit your rifle? Call us anytime at 805-206-6705 and one of our experienced specialists will get you pointed in the right direction. If you’re ready to go with this ELF AR-10/.308 Trigger and you’re ready to buy, simply order online from The Buffalo today.

DID YOU KNOW? Buying USA made products like this Elf AR-10/.308 drop in trigger greatly contributes to American manufacturing, job creation, financial growth and more. Most of all, buying USA made products circulates your hard earned money BACK into the US economy. In addition, as a result of purchasing USA made products, you help eliminate the need for foreign outsourcing. Customers can call or order online today for top quality USA made ELF AR-10/.308 triggers from The Buffalo Ventura CA. Your source for premium USA made ELF AR-10/.308 triggers and more!

AR10_.308FeaturesBearings.800x600.ELF_Logo

Reviews

There are no reviews yet.

Be the first to review “ELF AR-10/.308 Trigger”

Your email address will not be published. Required fields are marked *

You may also like…

Elftmann Anti Walk pins
Elftmann Anti Walk pins
Elftmann Anti Walk pinsSo easy to install, it takes just seconds to protect your AR-15 or irreplaceable M-16 receiver. Installs by simply clipping master link over protective plate..154 Diameter Black Oxide Finish
not rated $20.95Add to cart

Related products

ELF X2 TRIGGER
ELF X2 TRIGGER
ELF X2 TRIGGERWith all the same great craftsmanship and features of the Elf 3-gun trigger, The new ELF Drop-In X-2 Trigger has been built for performance. The only AR-15 trigger using aircraft needle bearings, making for an incredibly smooth and fast trigger pull. Using two fingers together for a precise shot gives a pull weight as low as <1.5lbs per finger. Alternating fingers enables firing an average of 20% faster. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-tonone AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your preference. If you are looking for a unique adjustable trigger that allows rapid fire as well as unmatched precision, this is the trigger system for you.Fits any mil-spec AR-15 with removable trigger guard.(Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Easily adjustable from without removing from lower Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement and disabled veterans. Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing 100% made in America with a Lifetime Guarantee!
not rated $295.95Read more
.308 18″ RIFLE-LENGTH BARREL FLUTED STRAIGHT
.308 18″ RIFLE-LENGTH BARREL FLUTED STRAIGHT
DESCRIPTION
  • 18" 4150 CMV Steel 
  • Mid-Length Gas System
  • 1 x 10 twist rate
  • 750" diameter gas block seat
  • 5/8" x 24 threaded muzzle
  • Includes M4 feed ramped extension (nickel boron)
  • H-Bar Contour: Straight Fluted, National Match Barrel, Medium Weight, 18" long, black phosphate finish. Fluting provides weight savings & rigidity.
  • Weight: 3 lbs
  • Will Ship in 10-14 Days
not rated $329.95Add to cart
Tactical CAR Stock Wrench
Tactical CAR Stock Wrench

Description

  • Manufactured from heat treated steel
  • Rubberized Grip
  • Performs the job of a:Mil-Spec Castle Nut Wrench, Standard Length Receiver Extension Removal Wrench, A1/A2 Flash Suppressor Wrench
not rated $10.95Add to cart
ELF Match Trigger
ELF Match Trigger
The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aircraft needle bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR- 15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you.Product DescriptionFits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 1/2lbs without removing from lower Full power hammer spring ensures proper ignition of primer Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans 100% made in America with a Lifetime Guarantee! 
not rated $256.95Add to cart