Back to 80 Percent Lowers
Sale!
Forged 80% AR 15 lower

FORGED 80% AR15 LOWER -The Buffalo

(1 customer review)

$100.95

FORGED 80% AR -15 LOWER – The Buffalo

THERE IS A NATIONAL SHORTAGE OF FORGINGS AT THE FOUNDRIES GET THEM WHILE THEY ARE AVAILABLE

The AR-15 80% forged lower receiver is precision machined in house from high grade 7075 forgings to milspec standards, tumble deburred, bead blast finished, then Mil 8625 Type III, Class 2 anodized; making it compatible with most mil spec M16/M4 uppers and features a broached mag well. All that is left to do is machine the fire control pocket, for the trigger group and drill a few holes. Once complete you will have a fully functional TB-15 type lower.
– This is not a  receiver and still requires  to be done in order to have an operational firearm.
– NO FFL is required for purchase, item can be shipped directly to your home.We DO NOT SHIP to CT NY NJ HI
– As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968.
– Customer is responsible for compliance with local state and federal regulations regarding any products sold on our website.
– Our lowers have been found to be compatible with most jigs made for finishing forged style lowers,

We choose the 7075-T6 because it is one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent and it is ideally used for highly stressed p

62 in stock

Category: Tags: , ,

Description

 

 

 

 

 

 

 

Forged 80% AR15 lower

THERE IS A NATIONAL SHORTAGE OF FORGINGS AT THE FOUNDRIES GET THEM WHILE THEY ARE AVAILABLE

Buy a premium USA Made forged 80% AR15 lower from The Buffalo IN STOCK SHIPPING SAME DAY  !!!

Looking for a top quality forged 80% AR15 lower for your next new build? You’ve come to the right site. This forged 80 percent AR15 lower is made from 7075-T6 forging and machined to mil-spec. Moreover, it is MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized. Why do we choose the 7075-T6? We selectively choose the 7075-T6 because it is quite simply one of the highest strength aluminum alloys available. In addition, its overall strength-to-weight ratio is excellent and it is ideally used for highly stressed parts. Our customers should know that we also carry the We DO NOT SHIP to CT NY NJ HI

DID YOU KNOW? Buying USA made products like this forged 80% lower greatly contributes to American manufacturing, job creation, financial growth and more. Most of all, buying USA made products circulates your hard earned money BACK into the US economy. In addition, as a result of purchasing USA made products, you help eliminate the need for foreign outsourcing. Customers can call or order online today for top quality USA made 80 percent 1911 frames from The Buffalo Ventura CA. Your source for premium USA made 80% lowers and more.Order today while supplies last!

1 review for FORGED 80% AR15 LOWER -The Buffalo

  1. Chris B. (verified owner) –

    Excellent 80% lower! Fit and finish is spot on, and doesn’t have the canted safety lever “effect” that other brands I have dealt with have. This isn’t my first lower I’ve gotten from Anthony (first being a 9mm slim 80%), and it won’t be my last. If you like quality pieces, pick one up, you won’t be disappointed with the product or excellent service from Anthony. Thanks again Buffalo!

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Sale! 80% 9mm AR15 lower Black Anodized
80% 9mm AR15 lower Black Anodized
AR15 9MM 80% Lower Receiver Stripped
  • Made from 7075-T6 forging and machined to mil-spec
  • We also carry the LPK and Magazines for the 9mm
  • This receiver takes Colt Magazines
  • MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized
  • Last Round Bolt Hold Open
  • MADE IN USA
  • We DO NOT SHIP to CT NY NJ HI
 Please check out 9mm builders kit used to finish this 80% lower https://thebuffalo.us/shop/9mm-builders-kit Also check out the Slim Colt 9mm 80% lower https://thebuffalo.us/shop/80-9mm-ar15-lower-slim-black-anodized-2/

  • We choose the 7075-T6 because it is one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent and it is ideally used for highly stressed parts.

not rated $139.95 Read more
Billet 80 AR LOWER
Billet 80% AR LOWER
  •  This is not a completed receiver and still requires machining to be done in order to have an operational firearm.
  •  NO FFL is required for purchase, item can be shipped directly to your home.We DO NOT SHIP to CT NY NJ HI
  • As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968.
  • Customer is responsible for compliance with local state and federal regulations regarding any products sold on our website.
  •  Our lowers have been found to be compatible with most jigs made for finishing forged style lowers
not rated $175.95 Add to cart

Related products

AR15 80% 9mm Dedicated Billet Lower Glock Mag W/ Kit
AR15 80% 9mm Dedicated Billet Lower Glock Mag W/ Kit
These are 80% Gun Point Custom Glock 9mm Billet lower receivers. The Buffalo has an exclusive on this lower.  These are a dedicated 9mm Billet design that comes with all the features in the top of the line Gun Point model but in an 80% configuration. These lowers have all the key features you would expect from a high end manufacturer. NO ROLL PINS!! The roll pin has been replaced with a set screw to eliminate the need of beating on the lower receiver. The rear take down pin detent spring is also held in with a set screw making it easier for you to change buffer tubes. The receiver tension set screw effectively eliminates any unwanted “slop” between upper and lower receivers for superior accuracy. No FFL required. As determined by the firearms technology branch of the ATF, this lower receiver is not classified as a “firearm” as defined by the GCA of 1968. We have the ability ship to your door because 80% lowers are not considered firearms by the ATF. Lead time: May very depending on volume of orders at the time placed
$250.99 Read more
Sale! 80% 1911 STAINLESS STEEL FRAME SMOOTH
80% 1911 STAINLESS STEEL FRAME SMOOTH

Available in ramped and non ramped just add in the notes

80% 1911 SMOOTH FRAME

80%1911 series 70 forged 416r stainless steel frame with smooth grip.

This is a not an FFL item. This is not a complete frame and still requires machining to be done.

4 Operations left to be completed are

  • Decking the top
  • hammer hole
  • Sear hole
  • Slide rails
  • Beavertail safety fitting (personal preference)
  • 80% 1911 70 Series Steel Frame with checkered grip
  • 1911 Frames precision machined 
  • Government style frames
  • 416r Stainless Steel
  • In the White 
  • Standard Trigger Guard
  • NON Ramp 
  • Magwell is Broached 
  • Trigger Broached
  • MADE IN USA

Machined single stack receiver is ready for the slide, barrel, and fire-control components of your choice to build a rugged, precision-shooting competition, combat, or carry pistol. Machined to precise tolerances from high-quality 416R stainless steel, then heat-treated to Rc 28-32 for exceptional wear resistance. Bead blasted to produce a smooth, non-reflective surface ready for the finish of your choice. Rails are not cut . Grip safety is full size 1911 with 70 Series tang  and has a smooth, plain, front strap with a rounded.

not rated $200.95 Read more
Sale! 5.56 & 9MM Billet Assembled Side Charging Upper Non-Reciprocating
5.56 & 9MM Billet Assembled Side Charging Upper Non-Reciprocating
5.56 & 9MM Billet Assembled Side Charging Upper  Non-Reciprocating
  • Machined from 6061 billet aluminum
  • Matte black hard-coat anodized per Mil 8625 Type 3 Class 2
  • Compatible with all standard AR-15 components and most aftermarket parts — Machined pocket to accomodate Magpul BAD Lever
  • The ONLY Non Reciprocating Side Charger on the market to accept ANY standard MILSPEC BCG — Just change out cam pin with the modified cam pin we provide
  • Adjustable tension slide lock on charging handle
  • Rear dust cover trap door that seals shut when mated with lower
  • Manufactured to MILSPEC on state of the art CNC equipment for consistent quality parts and exacting tolerances
  • Save money by building your own AR-15 rifle from the ground up exactly the way you want it configured
  • Designed to match lines with New Frontier Armory C-4 Billet Lower and most forged AR-15 Lowers
  • Ejection port cut to eject large calibers up to .458 SOCOM shells
not rated $249.95 Read more
Placeholder
AR15 Billet upper and 80% lower matching set

80% BILLET AR15 lower receivers and Upper receiver Combo.

We DO NOT SHIP to CT NY NJ HI

Our mission is to provide customers with a High quality product that they are excited to own & use in any environment that they find themselves in. The high standards that they have placed on their products are driven directly by the high expectations that customers have for any of our products. By utilizing the latest machining technologies during the production of their AR receivers they are able to exceed military standards ensuring the best possible base to build an AR rifle from. Our AR15 Billet Lower Receiver is a Precision machined AR 15 style receiver. The receiver is the perfect foundation to start any AR rifle build. Quality CNC Billet 7071 T6 AR-15 stripped Upper Receiver. They will all be machined to except the bad levers. The Receivers will flat top M4 upper receiver. These are made from billet and hard coat anodize black. We machine these receivers out of billet Aluminum and finish it in a durable Hard Anodized finish. We cut the M4 feed ramps before the Anodizing process. We also flared the side walls of the receiver to eliminate accidental bolt release problems and we also machined the upper receiver in a way that lets you use the popular Magpul BAD lever or other aftermarket bolt catch levers which most other billet upper receivers don’t let you do. Because of our beefier design, it allows for less flex than forged upper receivers.

we machined our billet upper receiver to accept most aftermarket rail systems as well as pre-install the forward assist and the ejection port door. Our billet upper receiver matches our billet lower perfectly, but it also works great with standard forged lowers so it’s fully up to you on which receiver you want to use.  Features:
  • CNC MACHINED FROM 7071 T6 BILLET
  • ANODIZED BLACK
  • INTEGRALLY MACHINED TRIGGER GUARD
  • REINFORCED BUFFER TUBE AREA
  • FLARED MAGWELL, COMPATIBLE WITH USGI AND MAGPUL GEN 2⁄3 MAGAZINES

NON FFL ITEM We DO NOT SHIP to CT NY NJ HI

not rated $425.95 Add to cart