Back to Uncategorized
Tactical CAR Stock Wrench
LANTAC .223/5.56X45MM Enhanced Full Auto Bolt Carrier Group NiB Coated
LANTAC E-BCG, Enhanced Bolt Carrier Group. M16 Full Auto Style for increased mass and lock time. Our new BCG is precision machined from 8620 Steel with a shot peened bolt manufactured from Carpenter 158 and Magnetically Particle Inspected. The entire carrier assembly is NiB, Electroless Nickel Boron coated with the patented, advanced UCT EXO process, unlike standard NiB coatings. This offers extreme lubricity with a friction coefficent of .02 and surface hardness of 82-85 Rockwell C. The carriers patent pending design features unique shrouded and forward facing gas ports that have also been re sized so that gas is vented differently to a standard carrier. This results in a system that runs flatter with a smoother energy pulse. In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel. The flared boss at the tail of the carrier enhances the BCG's lock position within the upper and makes it more consistent, resulting in an accuracy improvement. All critical dimensions are hard turned / ground after heat treat and the bore of the carrier and gas key have been hard chrome lined for the best possible wear resistance. All E-BCG's feature the LANTAC CP-R360 patent pending domed cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx). The ultra smooth head reduces wear within the upper receiver. The BCG's 11.7oz weight helps to increase lock time and smoother operation. Gas keys are properly staked at four points and only grade 8 fasteners are used in assembly. The E-BCG's forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors. However, it should be noted that the E-BCG is not a complete solution for this issue and all rifles are different. 'Over Gassed' guns will suffer to a larger extent from this problem.
- Weight 11.7oz
- Forward Porting, enlarged vents.
- Balanced flared boss.
- 8620 Carrier, Heat Treated, Hard Turned, Chrome Lined
- MPI Carpenter 158 Bolt, Shot Peened, Hard Turned / Ground.
- NiB UCT EXO Coating.
- CP-R360 Domed Cam Pin
- Mil-Spec Gas Rings
- Mil-Spec Staked Gas Key
- Grade 8 Hardened Fasteners
- All Hard Chrome surfaces are to MIL-STD-171 188.8.131.52
- Shot Peening is conducted with S110 shot, Established by Almen Gage A-2 strip .006 -.008
- Lifetime Warranty.
- Made in the USA.
not rated $65.95 Add to cart
Mil-Spec Standard Lower Parts Kit
Mil-Spec Standard Lower Parts Kit - The Buffalo
- Mil-spec quality.
- Manganese phosphate finish for a long service life.
- Hammer & trigger are steel w/ black oxide finish.
- This kit includes the fire control group.
- MADE IN AMERICA
- Ships in 7 - 10 days
Add to cart
5.56 T.B. We The People URG
- 16" 5.56 1-9 Twist Hbar (1-8 & 1-7) available
- 12.5" KE Arms Keymod rail
- TB Upper Receiver
- Forged 7075-T6
- Precision Machined to Mil-SPEC
- MIL-A-8625F TYPE 3 CLASS 2 Hard coat Anodized
- .250" Take down Pin Bores
- Mil-Spec Charging Handle
- Standard Mil-spec MP TB 5.56 BCG
- Buffalo Latch Charging handle
- MADE IN USA
Rated 5.00 out of 5
Add to cart
ELF 3-Gun Trigger
The ELF Drop-In 3-Gun Trigger has been built for winning competitions. The only AR-15 trigger using aircraft needle bearings, making for an incredibly smooth and fast trigger pull. The skeletonized hammer combined with our exclusive .043 double double wound polished piano wire hammer spring make for the fastest lock time on the planet. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The 3-Gun trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your preference. If you are looking for the finest adjustable trigger for your competition AR-15 platform, this is the trigger system for you. Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 1/2lbs without removing from lower Exclusive double double wound hammer spring and skeletonized hammer ensure a lock time second to none. Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing A competition trigger that leaves all others behind 100% made in America with a Lifetime Guarantee!